10 BOX Mirka Abralon 500 Grit 6 in Foam Disk Abrasive Grip Sanding Wet finishing

Description

Mirka Abralon 8A-244-500    500 Grit Foam Backed Open Cell Mesh Finishing/Polishing Pads (10 Sheets in Box)
Hook and Loop
High Performance and Longer Life Span Than Other Traditional Abrasives
Longer Life Equals A Cost Effective Solution
Designed for Wet or Dry Sanding, Finishing and Polishing by Either Machine or Hand
Works best slightly wet
Cleaner Work Environment, Better Finishes, A Dust Free Product in Most Uses
Perfect for Woodworking, Auto Refinishing, Paint, Metal Working and the Marine Industry
Size: 6 inch Disk Pad
New in Convenient Sturdy Shop Ready Box of 10
Mirka describes is like this:  “
Abralon is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. The patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave allows water and air to pass freely, resulting in a cleaner sanding process and a long lasting abrasive. Recommended for fine sanding of profiled surfaces and for finishing prior to polishing. Recommended to use wet.
“ – We shortened that explanation to:
”Just AWSOME !”
Our Shop has been using this product for Decades.  We use it Dry on wood as a pre-treatment prior to finishing and for polishing between coats of finish and as a final post-finish treatment.  It is fabulous on Solid Surfaces such as Corion Metal, Plastics and more.  It works Wet or Dry, but the finer grits work best wet.  It takes very little water and the foam pad retains the water with very little slinging out the sides.  We usually just a fine mist spray bottle to apply a little water as we go.  Because the foam makes it work well on contours and irregular surfaces, we find it to be our Go-To abrasive for removing Oxidation for instance on Fiberglass.  It makes for a smooth sanding pattern on angled surfaces, edges, rolled or rounded over edges contours and the like with minimized risk of pressure marks and burn-throughs.
The abrasive surface is actually an abrasive fabric that water and fine particles can  pass through.  These pads can be washed out in the sink and reused when they begin to clog and are often good for a few cleanings before the abrasive wears.  With grigs up to 4000 you can produce a mirror finish that will be amazing.   It is the perfect Post-Finish treatment for any surface, wood, composite, Fiberglass Epoxy or Polyester or metal.  Abralon really shines with finishes such as Lacquer.
Abralon works well with Pnumatic Sanders and most electric machines such as the Mirka Deros, even when using wet when spraying just a fine mist with a spray bottle or by occasionally spraying the pad itself.
Available in Economical and Convenient Boxes of 10 – perfect for small shops like mine - easy on your shop space and easy to access and easy to keep organized.  The boxes are strong and easy to stack or shelve, quick and easy to open and grab a sheet.  - Or if you prefer, also available in boxes of 20 for high-volume operations or for the grit or two that you use the most.  Don't take a chance on Vendors that sell you look-alike pads in a plastic bag!  The are the genuine Real-Deal from an Authorized Mirka Reseller for Mirka Tools and Abrasives.
Positively the finest versatile abrasive sanding and Processing Material made for surfaces new and old - Period !
Our woodshop is always buzzing with work on wooden boats, refitting yacht casework and interiors and all sorts of other fun, and it is a rare day that d/a’s and sanders of various sorts aren’t heard buzzing somewhere nearby.  Close to all of our work stations is a good supply of Abranet and Abralon.   Yellow Mirka tools loaded with Mirka Abrasives are all over the place.
One of our Mottos at Jean Street Shipyard is that we only sell the products that we really use ourselves in our own shop, and really believe in ourselves.  If its not good enough for us – we wont sell it to you!  Almost 30 years ago at a woodworking show, a Mirka Rep gave me a few sheets of Mirka Abranet and some Abralon to try.  (hard to believe since back then we were actually a 3m abrasives dealer).  After a few months of sitting on a shelf in the shop I finally tried it and ever since that first day Abranet  has been our Abrasive of choice.  We soon tried Abralon and all of the gaps were filled in - we had the perfect Complete Finishing System.  One try and we were sold and I believe it will be the same when you try it yourself – its that much better.  It is the most innovative solution to controlling sanding dust, but it is also the finest abrasives we have ever used.  Longest lasting – most consistent – best finish !
It would be enough to brag on the fine, super consistent scratch free sanding you get that is second to none among the world of abrasives.  But that’s just scratching the surface (if you will pardon the pun).
Because we are a working shop, we are barraged with endless free samples of abrasives from the various manufacturers and jobbers and dealers – we give them all a try – but in 30 years, none have changed our mind.  Not even close!
So… Don’t take our word for it – try one of our “Assortment Packs”  you will be sold too !
And Thanks for shopping with
Jean Street Shipyard
.
We care for our products because we care about our customers.  Your purchase will be carefully packaged by our own ship’s store staff, not someone at some far away fulfillment center.
When we say your item is
"new"
, then that’s what you get.  We don’t sell seconds, overstocks, obsolete or outdated inventory or anybody’s rejects as new product.   We are a High Volume, authorized Reseller of Mirka Tools and Abrasives.
Our inventory is right on hand in our own store, and is carefully selected using the experience that comes with 175 plus years in business in the Marine industry.  We have been in the same place, same building,  doing the same thing since 1843, and we are standing by now to serve
your
boating needs.  We Only sell and endorse the products that we use ourselves and products that have stood the test of time.  We have been around long enough to see what works and what doesn't.  We are a full service working woodshop and boatyard.  We use what we sell every day.
When you need assistance or have a problem, you don't get somebody in some far away call center reading que cards, we will put you in touch with a skilled professional right from our own shop that actually uses the product, someone who has likely also had your question or problem as you.
Get the advantage of a small business that has time to
care about every single customer
and also has the years of experience to help you properly.
Like to know more about us ?? ...
Google us -
Jean Street Shipyard
Tampa Florida
See you again soon!
By the way…
Jean Street Shipyard
stocks
thousands
of items right in our own store.  We strive to stock the products that most boaters and woodworkers need, and have it handy and always ready to ship.  We are adding products to our eBay store every day.  So if it’s not here, or if you don’t see exactly what you need, chances are that we have it stock or can get it for you quickly.  Please message us, email us, or give us a call.  We are standing by to serve you.
If you need larger quantities of an item that is online at our store please contact us.
We can handle special orders and build lists.  Give us a call!
Return Policy: If this purchase does not meet your expectations or is not as described or photographed, or even if you just changed your mind or ordered the wrong part - its all OK - please contact us within
30 days from delivery to your shipping address for return instructions, or just return it through eBay.
We want to make your Online experience as seamless and easy as coming in person.  So no stress, we will make it work.
If you have a warranty problem, we have a good reputation with our venders  We will contact them for you, they usually listen to us, we can ship you an exchange without the time to wait for an answer from the manufacturer.
We strive to meet your expectations!
All offered items by Jean Street Shipyard, new, used or pre-owned are selected by us for High Quality and Excellent value.
Contact us via text; phone; message or via email for inquiries or questions.
or stop by and pay a visit!